Kitchen hood
A kitchen hood, exhaust hood, hood fan, extractor hood, or range hood is a device containing a mechanical fan that hangs above the stove or cooktop in the kitchen. It removes airborne grease, combustion products, fumes, smoke, heat, and steam from the air by evacuation of the air and filtration.[1] In commercial kitchens exhaust hoods are often used in combination with fire suppression devices so that fumes from a grease fire are properly vented and the fire is put out quickly. Commercial vent hoods may also be combined with a fresh air fan that draws in exterior air, circulating it with the cooking fumes, which is then drawn out by the hood.
In most exhaust hoods, a filtration system removes grease (the grease trap) and other particles. Although many vent hoods exhaust air to the outside, some recirculate the air to the kitchen. In a recirculating system, filters may be used to remove odors in addition to the grease.
The device is known as an extractor hood in the United Kingdom, as a range hood in the United States, and as a rangehood in Australia. It is also called a stove hood, hood fan, cooker hood, vent hood, or ventilation hood. Other names include cooking canopy, extractor fan, fume extractor, and electric chimney.
Description
An extractor hood consists of three main components: a skirt or capture panel to contain the rising gases (also known as the "effluent plume"), a grease filter, and a fan for ventilation.
Extractor hoods may be ducted (or vented) or ductless (or recirculating). Ducted hoods blow the gases to the outdoors; ductless hoods filter the air, often using activated charcoal, to remove odor and smoke particles from the air and then release the cleaned air back into the kitchen.
A ducted system removes of all forms of airborne contamination, while a ductless one recirculates heat and moisture. In addition, a ducted application eliminates the need for regular replacement of the filters and avoids the airflow restriction (and the resultant loss of power) caused by them. However, the ducted application can be impractical, due to lack of space or ability to install a duct system, make-up air requirements, or the additional cost of heating or cooling the make-up air.
Exhaust hoods almost always include built-in lighting to illuminate the cooking surface. Extractor hood controls are typically electronic, though some low-end models use electromechanical controls. Extractor hoods with electronic controls can offer remote control, motorized height adjustment, thermal sensor, overheat protection, boost mode, delayed shut-off, filter cleaning reminder, active noise cancellation, temperature display, user presets (memory), and so on.
Extractor hoods may be made from a variety of materials, including stainless steel, copper, bronze, nickel silver, zinc, tempered glass, wood, aluminum, brass, heat-resistant plastics, and more.
NFPA 96 Standard for Ventilation Control and Fire Protection of Commercial Cooking says that mesh filters shall not be used. It requires that "Listed" grease filters shall be tested in accordance with UL 1046, Standard for Grease Filters for Exhaust Ducts.
Types
Kitchen hoods are broadly classified into ducted hoods and ductless hoods. This classification of these kitchen hoods[2][3] is done purely on the basis of how the hoods process the air that is being sucked in.
Ducted kitchen hoods
Ducted kitchen hoods are the most common and a primary type of kitchen hood. As the name suggests, a ducted kitchen hood has a duct that is used to process and expel any smoke that is generated on top of the kitchen hob.
Large sized duct hoods are widely used not just in homes but also in commercial restaurants and communal kitchens too.
Ductless kitchen hoods
Ductless kitchen hoods do not have a duct that is used to process the air. Instead, it makes use of strong air filtration and then pumps out the air back into the room. These types of range hoods are usually used in houses.
Filters
Filters remove most odors and particulates, including grease, from the vented air. There are three main types of filter:
- Mesh or cassette filters are made from aluminium mesh strips placed one over the other. They are highly effective in the capture and removal of oil and grease from smoke of both ducted and ductless chimneys. They must be cleaned regularly.
- Baffle filters are made of steel/aluminium frames with curved panels. The curves catch on grease, oil and other particulates. They are durable and easy to clean and are used in both ducted and ductless chimneys. They must be cleaned regularly.
- Charcoal filters are made of fine powdered activated charcoal. They are primarily used for ductless applications. They cannot be cleaned, but need to be replaced regularly.
Hood overhang
Greater hood overhangs are suggested to help contain cooking fires in the hood area protected by the fire suppression system.[4]
Noise levels
Loud kitchen hoods can affect well-being, and may even contribute to hearing loss.[5] Variable speed fans are generally noisier at higher speeds and different models may have different noise levels. Vented hoods are generally noisier but more effective than recirculating hoods.[5]
Noise levels are measured on dB(A) scale[6] or in sones (in the U.S.).[7] Most kitchen hoods produce 60-70 dB(A), while "quiet" models can go as low as 40 dB(A).[5][8]
Noise levels are generally given for the maximum speed,[6] so it may be useful to compare noise levels at specific flow rates.
The European Union standardizes the measurement of hood noise.[9]
Flow
Hood air flow is measured in liters per second (L/s), cubic meters per second (m3/s), or cubic feet per minute (cfm).[10]
See also
- Fume hood
- Kitchen ventilation
- Smoke canopy
References
- ^ Thom, J (1989). The Lore of Wedge. York: Penguin. p. 12.
- ^ "Range Hood Buying Guide". Consumer Reports. Retrieved 2019-05-25.
- ^ "Ducted vs. Ductless Range Hoods: The Pros & Cons". Compact Appliance. 2015-08-05. Retrieved 2019-05-25.
- ^ Optimizing Airflows in Foodservice Facilities - Part 2 | TABLE 1. Recommended overhangs for principal commercial kitchen appliances| Page 2 of 5 CaptiveAire
- ^ a b c Understanding Cooker Hood Noise Levels - Chef's Pick
- ^ a b Your Guide to Cooker Hood Noise Levels - Ship It Appliances Ltd
- ^ Choosing a Range Hood, Vent Hood, Kitchen Hood, Kitchen Ventilation - Tips from an Expert | KitchenSource.com
- ^ How We Test Cooker Hoods - Which?
- ^ Cooker hoods and dB - neutratest.com
- ^ Exhaust Hoods - Sizing exhaust hoods - air volume flow and capture velocities - online exhaust hood calculator
External links
- Article: "Oversized Kitchen Fans--An Exhausting Problem" by Bruce Manclark in Home Energy Magazine Online January/February 1999
- v
- t
- e
concepts
- Air changes per hour
- Bake-out
- Building envelope
- Convection
- Dilution
- Domestic energy consumption
- Enthalpy
- Fluid dynamics
- Gas compressor
- Heat pump and refrigeration cycle
- Heat transfer
- Humidity
- Infiltration
- Latent heat
- Noise control
- Outgassing
- Particulates
- Psychrometrics
- Sensible heat
- Stack effect
- Thermal comfort
- Thermal destratification
- Thermal mass
- Thermodynamics
- Vapour pressure of water
- Absorption refrigerator
- Air barrier
- Air conditioning
- Antifreeze
- Automobile air conditioning
- Autonomous building
- Building insulation materials
- Central heating
- Central solar heating
- Chilled beam
- Chilled water
- Constant air volume (CAV)
- Coolant
- Cross ventilation
- Dedicated outdoor air system (DOAS)
- Deep water source cooling
- Demand controlled ventilation (DCV)
- Displacement ventilation
- District cooling
- District heating
- Electric heating
- Energy recovery ventilation (ERV)
- Firestop
- Forced-air
- Forced-air gas
- Free cooling
- Heat recovery ventilation (HRV)
- Hybrid heat
- Hydronics
- Ice storage air conditioning
- Kitchen ventilation
- Mixed-mode ventilation
- Microgeneration
- Passive cooling
- Passive daytime radiative cooling
- Passive house
- Passive ventilation
- Radiant heating and cooling
- Radiant cooling
- Radiant heating
- Radon mitigation
- Refrigeration
- Renewable heat
- Room air distribution
- Solar air heat
- Solar combisystem
- Solar cooling
- Solar heating
- Thermal insulation
- Thermosiphon
- Underfloor air distribution
- Underfloor heating
- Vapor barrier
- Vapor-compression refrigeration (VCRS)
- Variable air volume (VAV)
- Variable refrigerant flow (VRF)
- Ventilation
- Water heat recycling
- Air conditioner inverter
- Air door
- Air filter
- Air handler
- Air ionizer
- Air-mixing plenum
- Air purifier
- Air source heat pump
- Attic fan
- Automatic balancing valve
- Back boiler
- Barrier pipe
- Blast damper
- Boiler
- Centrifugal fan
- Ceramic heater
- Chiller
- Condensate pump
- Condenser
- Condensing boiler
- Convection heater
- Compressor
- Cooling tower
- Damper
- Dehumidifier
- Duct
- Economizer
- Electrostatic precipitator
- Evaporative cooler
- Evaporator
- Exhaust hood
- Expansion tank
- Fan
- Fan coil unit
- Fan filter unit
- Fan heater
- Fire damper
- Fireplace
- Fireplace insert
- Freeze stat
- Flue
- Freon
- Fume hood
- Furnace
- Gas compressor
- Gas heater
- Gasoline heater
- Grease duct
- Grille
- Ground-coupled heat exchanger
- Ground source heat pump
- Heat exchanger
- Heat pipe
- Heat pump
- Heating film
- Heating system
- HEPA
- High efficiency glandless circulating pump
- High-pressure cut-off switch
- Humidifier
- Infrared heater
- Inverter compressor
- Kerosene heater
- Louver
- Mechanical room
- Oil heater
- Packaged terminal air conditioner
- Plenum space
- Pressurisation ductwork
- Process duct work
- Radiator
- Radiator reflector
- Recuperator
- Refrigerant
- Register
- Reversing valve
- Run-around coil
- Sail switch
- Scroll compressor
- Solar chimney
- Solar-assisted heat pump
- Space heater
- Smoke canopy
- Smoke damper
- Smoke exhaust ductwork
- Thermal expansion valve
- Thermal wheel
- Thermostatic radiator valve
- Trickle vent
- Trombe wall
- TurboSwing
- Turning vanes
- Ultra-low particulate air (ULPA)
- Whole-house fan
- Windcatcher
- Wood-burning stove
- Zone valve
and control
- Air flow meter
- Aquastat
- BACnet
- Blower door
- Building automation
- Carbon dioxide sensor
- Clean air delivery rate (CADR)
- Control valve
- Gas detector
- Home energy monitor
- Humidistat
- HVAC control system
- Infrared thermometer
- Intelligent buildings
- LonWorks
- Minimum efficiency reporting value (MERV)
- Normal temperature and pressure (NTP)
- OpenTherm
- Programmable communicating thermostat
- Programmable thermostat
- Psychrometrics
- Room temperature
- Smart thermostat
- Standard temperature and pressure (STP)
- Thermographic camera
- Thermostat
- Thermostatic radiator valve
trades,
and services
- Architectural acoustics
- Architectural engineering
- Architectural technologist
- Building services engineering
- Building information modeling (BIM)
- Deep energy retrofit
- Duct cleaning
- Duct leakage testing
- Environmental engineering
- Hydronic balancing
- Kitchen exhaust cleaning
- Mechanical engineering
- Mechanical, electrical, and plumbing
- Mold growth, assessment, and remediation
- Refrigerant reclamation
- Testing, adjusting, balancing
organizations
- Indoor air quality (IAQ)
- Passive smoking
- Sick building syndrome (SBS)
- Volatile organic compound (VOC)
- ASHRAE Handbook
- Building science
- Fireproofing
- Glossary of HVAC terms
- Warm Spaces
- World Refrigeration Day
- Template:Home automation
- Template:Solar energy